How-to clean your Shower Head

How-to clean your Shower Head

Has your shower head become clogged with minerals meaning some jets do not flow. Save yourself some money, instead of buying a new showerhead, follow these simple steps to unclog it and make it work like new again.

Step 1: Using a scrubber sponge wipe away as much dry debris from the shower holes as possible.


Step 2: Take a plastic bag and fill it with a solution of equal amounts of white vinegar and water. You need about 1 cup of this solution in the bag.


Step 3: Tie the plastic bag around the shower head with an elastic band. Make sure the holes are immersed in the liquid and the bag is fully secured.


Step 4: Leave it to soak for around 15 to 20 minutes.


Step 5: Finally remove the bag and wipe the shower head. Turn on the shower and run hot water through it. Your shower should now be as good as new. If some are still blocked place it back in the liquid for longer.

Leave a comment

Please note, comments must be approved before they are published