How-to Fit a Shower Enclosure

How-to Fit a Shower Enclosure

Things you will need:

  • Electric Drill
  • Sealant Gun
  • Silicone Sealant
  • Spirit Level
  • Screwdrivers
  • Door Handles
  • Glass Panels
  • Channels
  • Fixings


Step 1: At the edges of the shower tray place the wall channels and use a spirit level to make sure they are vertical and level.


Step 2: Drill pilot holes in the wall using the electric drill. Then insert wall plugs into the holes and screw the channels to the wall.


Step 3: After you have decided which side you want the shower door to be on, take the side panel off and slot the door into the appropriate channel.


Step 4: The next step is a bit tricky so you might need a helping hand. You need to fit the shower door into the other wall channel.


Step 5: Now place the shower door and the side panel on the outside edge of the tray. Then fit them together at the corner.


Step 6: Using the fittings provided with the unit, screw the panels into position using the screwdriver and fit the handle to the door.


Step 7: Seal the outer edges of the shower using the silicone sealant and sealant gun. Make sure to avoid the inside edges though.

Leave a comment

Please note, comments must be approved before they are published